AME (License) + B Tech in AME Syllabus
The AME (License) + B.Tech in AME syllabus combines core engineering concepts with specialized aircraft maintenance training. Topics include aerodynamics, propulsion, avionics, materials science, and maintenance protocols. Practical modules cover safety regulations, troubleshooting, and repairs, meeting DGCA standards for licensing. This program prepares students for technical roles in aviation maintenance and engineering.
DGCA Modules List for AME Course Syllabus
Module 1 – Mathematics
- Arithmetic
- Algebra
- Geometry
Module 2 – Physics
- Matter
- Mechanics
- Thermodynamics
- Optics
- Wave Motion and Sound
Module 3 – Electrical Fundamentals
- Electron Theory
- Static Electricity and Conduction
- Electrical Terminology
- Generation of Electricity
- DC Sources of Electricity
- DC Circuits
- Resistance/Resistor
- Inductance/Inductor
- DC Motor/Generator Theory
- Resistive (R), Capacitive (C) and Inductive (L) Circuits
- Transformers
- Filters
- AC Generators
- AC Motors
Module 4 – Electronic Fundamentals
- Semiconductors
- Printed Circuit Boards
- Servomechanisms
Module 5 – Digital Techniques Electronic Instrument System
- Electronic Instrument Systems
- Numbering Systems
- Data Conversion
- Data Buses
- Logic Circuits
- Basic Computer Structure
- Microprocessors
- Integrated Circuits
- Multiplexing
- Fibre Optics
- Electronic Displays
- Electrostatic Sensitive Devices
- Software Management Control
- Electromagnetic Environment
- Typical Electronic/Digital Aircraft Systems
Module 6 – Materials and Hardware
- Aircraft Materials — Ferrous
- Aircraft Materials — Non-Ferrous
- Aircraft Materials – Composite and Non-Metallic
- Corrosion
- Fasteners
- Pipes and Unions
- Springs
- Bearings
- Transmissions
- Control Cables
- Electrical Cables and Connectors
Module 7 – Maintenance Practices
- Safety Precautions-Aircraft and Workshop
- Workshop Practices
- Tools
- Avionic General Test Equipment
- Engineering Drawings, Diagrams and Standards
- Fits and Clearances
- Electrical Wiring Interconnection System (EWIS)
- Riveting
- Springs
- Bearings
- Transmissions
- Control Cables
- Material handling
- Welding, Brazing, Soldering and Bonding
- Aircraft Weight and Balance
- Aircraft Handling and Storage
- Disassembly, Inspection, Repair and Assembly Techniques
- Abnormal Events
- Maintenance Procedures
Module 8 – Basic Aerodynamics
- Physics of the Atmosphere
- Aerodynamics
- Theory of Flight
- Flight Stability and Dynamics
Module 9 – Human Factors
- General
- Human Performance and Limitations
- Social Psychology
- Factors Affecting Performance
- Physical Environment
- Tasks
- Communication
- Human Error
- Hazards in the Workplace
Module 10 – Aviation Legislation
- Regulatory Framework
- CAR-66 Certifying Staff – Maintenance
- CAR-145 — Approved Maintenance Organisations
- Aircraft Operations
- Aircraft Certification
- CAR-M
- Applicable National and International Requirements
- Safety Management System
- Fuel Tank Safety
Module 11A – Turbine Aeroplane Aerodynamics, Structures and Systems
- Theory of Flight
- Airframe Structures — General Concepts
- Airframe Structures — Aeroplanes
- Air Conditioning and Cabin Pressurisation (ATA 21)
- Instruments/Avionic Systems
- Electrical Power (ATA 24)
- Equipment and Furnishings (ATA 25)
- Fire Protection (ATA 26)
- Flight Controls (ATA 27)
- Fuel Systems (ATA 28)
- Hydraulic Power (ATA 29)
- Ice and Rain Protection (ATA 30)
- Landing Gear (ATA 32)
- Lights (ATA 33)
- Oxygen (ATA 35)
- Pneumatic/Vacuum (ATA 36)
- Water/Waste (ATA 38)
- On Board Maintenance Systems (ATA 45)
- Integrated Modular Avionics (ATA 42)
- Cabin Systems (ATA 44)
Module 11B – Piston Aeroplane Aerodynamics, Structures and Systems
- Theory of Flight
- Airframe Structures — General Concepts
- Airframe Structures — Aeroplanes
- Air Conditioning and Cabin Pressurisation (ATA 21)
- Instruments/Avionic Systems
- Electrical Power (ATA 24)
- Equipment and Furnishings (ATA 25)
- Fire Protection (ATA 26)
- Flight Controls (ATA 27)
- Fuel Systems (ATA 28)
- Hydraulic Power (ATA 29)
- Ice and Rain Protection (ATA 30)
- Landing Gear (ATA 32)
- Lights (ATA 33)
- Oxygen (ATA 35)
- Pneumatic/Vacuum (ATA 36)
- Water/Waste (ATA 38)
Module 12 – Helicopter Aerodynamics, Structures and Systems
- Theory of Flight — Rotary Wing Aerodynamics
- Flight Control Systems
- Blade Tracking and Vibration Analysis
- Transmissions
- Airframe Structures
- Air Conditioning (ATA 21)
- Instruments/Avionic Systems
- Electrical Power (ATA 24)
- Equipment and Furnishings (ATA 25)
- Fire Protection (ATA 26)
- Fuel Systems (ATA 28)
- Hydraulic Power (ATA 29)
- Ice and Rain Protection (ATA 30)
- Landing Gear (ATA 32)
- Lights (ATA 33)
- Pneumatic/Vacuum (ATA 36)
- Integrated Modular Avionics (ATA 42)
- On Board Maintenance Systems (ATA 45)
- Information Systems (ATA 46)
Module 13 – Aircraft Aerodynamics, Structures and Systems
- Theory of Flight
- Structures — General Concepts
- Autoflight (ATA 22)
- Communication/Navigation (ATA 23/34)
- Electrical Power (ATA 24)
- Equipment and Furnishings (ATA 25)
- Flight Controls (ATA 27)
- Instrument Systems (ATA 31)
- Lights (ATA 33)
- On Board Maintenance Systems (ATA 45)
- Air Conditioning and Cabin Pressurisation (ATA 21)
- Pressurisation
- Fire Protection (ATA 26)
- Fuel Systems (ATA 28)
- Hydraulic Power (ATA 29)
- Ice and Rain Protection (ATA 30)
- Landing Gear (ATA 32)
- Oxygen (ATA 35)
- Pneumatic/Vacuum (ATA 36)
- Water/Waste (ATA 38)
- Integrated Modular Avionics (ATA 42)
- Cabin Systems (ATA 44)
- Information Systems (ATA 46)
Module 14 – Propulsion
- Turbine Engines
- Engine Indicating Systems
- Starting and Ignition Systems
Module 15 – Gas Turbine Engine
- Fundamentals
- Engine Performance
- Inlet
- Compressors
- Combustion Section
- Turbine Section
- Exhaust
- Bearings and Seals
- Lubricants and Fuels
- Lubrication Systems
- Fuel Systems
- Air Systems
- Starting and Ignition Systems
- Engine Indication Systems
- Power Augmentation Systems
- Turbo-prop Engines
- Turbo-shaft Engines
- Auxiliary Power Units (APUs)
- Powerplant Installation
- Fire Protection Systems
- Engine Monitoring and Ground Operation
- Engine Storage and Preservation
Module 16 – Piston Engine
- Fundamentals
- Engine Performance
- Engine Construction
- Engine Fuel Systems
- Carburetors
- Fuel Injection Systems
- Electronic Engine Control
- Starting and Ignition Systems
- Induction, Exhaust and Cooling Systems
- Supercharging/Turbocharging
- Lubricants and Fuels
- Lubrication Systems
- Engine Indication Systems
- Powerplant Installation
- Engine Monitoring and Ground Operation
- Engine Storage and Preservation
Module 17 – Propeller
- Fundamentals
- Propeller Construction
- Propeller Pitch Control
- Propeller Synchronising
- Propeller Ice Protection
- Propeller Maintenance
- Propeller Storage and Preservation
B.Tech in AME Syllabus
Engineering Mathematics: Focuses on advanced calculus, differential equations, and linear algebra to solve engineering problems. Provides essential analytical tools for applications in various engineering fields.
Engineering Physics: Covers fundamental principles like mechanics, thermodynamics, and electromagnetism. It applies these principles to solve practical engineering challenges in material and system design.
Engineering Chemistry: Studies chemical properties and reactions of materials relevant to engineering, such as corrosion and fuels. It includes applications in energy production and materials science.
Computer-Aided Design (CAD): Teaches digital design and drafting for engineering projects using specialized software. CAD enables precision in creating and modifying 2D and 3D models.
Aerodynamics: Explores the behavior of air and gases around solid objects, especially aircraft. It covers concepts like lift, drag, and thrust, which are vital in aviation and automotive design.
Propulsion Systems: Focuses on engines and other systems that generate thrust for vehicles and aircraft. It includes studying jet, piston, and rocket engines in terms of efficiency and design.
Avionics: Involves the study of electronic systems used in aircraft for navigation, communication, and flight control. Avionics are crucial for modern aviation safety and efficiency.
Aircraft Structures: Examines the design and composition of aircraft frameworks to ensure strength and stability. Topics include load-bearing structures, materials, and stress analysis.
Flight Mechanics: Analyzes aircraft motion and stability under various forces, including lift and gravity. It helps in understanding how different factors affect flight performance.
Control Systems: Studies automatic regulation of system behavior to ensure stability and efficiency. Widely used in aviation for autopilot and navigation systems.
Thermal Systems: Covers heat transfer, thermodynamics, and energy conversion in engineering. It’s essential for designing efficient engines and managing aircraft cooling systems.
Robotics and Automation: Focuses on designing automated systems and robotic mechanisms for various industries. Emphasizes control, programming, and operational efficiency.
Material Science: Examines the properties and applications of materials in engineering. It’s critical for selecting appropriate materials for durability and performance in various conditions.
Manufacturing Processes: Involves techniques for producing parts and products, including casting, welding, and machining. Essential for quality, cost-effective production in engineering.
Engineering Drawing and Graphics: Teaches standardized drawing techniques to represent engineering components. Essential for clear communication and accurate manufacturing.
Project Management: Provides skills in planning, organizing, and managing engineering projects from conception to completion. Focuses on budget, time, and resource management.
Industrial Training/Internship: Practical experience in an engineering environment to apply theoretical knowledge. Internships bridge the gap between classroom learning and real-world applications.